7 Cylinders Radial Engine
Description
I didn't designed the engine. I only mixed 2 existent models, but this mix didn't exist in thingiverse, so I decided to create it. Here is a video https://youtu.be/p0WfWieY0UU Let's talk about printing: -All can be printed with a layer height between 0.12 and 0.2mm -The infill can variate between 20 and 30%, only the thinner and smaller pieces the like connecting rods and the propeller should be printed with 100% of infill -The majority of the pieces didn't needs supports, only the propeller, the master connecting rod, and maybe the prop housing - Quantity of pieces: 1 Block 1 Prop Housing 1 Propeller 1 Rotor 1 Master Connecting Rod 1 Master Connecting Rod Locker 1 Handle 1 Pin 1 Rotor Prop Link 7 Pistons 6 Connecting Rods When you finish to ensamblate, put some lubricant for a smoothly movement. If you printed this engine, please post a make! Good print!!!
Statistics
Likes
6
Downloads
0