Baby Bathtub Holder
Description
This item was created in frustration to the lack of space in my Queens 1BDR apartment to store my son's baby bathtub. It is intended to be used in walk in showers and allows for the bath to dry while being stored. It was only designed with the below bathtub @ target in mind. https://www.target.com/p/the-first-years-sure-comfort-deluxe-newborn-to-toddler-tub-with-sling-white/-/A-52722826?ref=tgt_adv_XS000000&AFID=google_pla_df&fndsrc=tgtao&CPNG=PLA_Baby%2BShopping_Brand&adgroup=SC_Baby&LID=700000001170770pgs&network=g&device=c&location=1023038&ds_rl=1246978&ds_rl=1248099&ds_rl=1242884&gclid=Cj0KCQjw5eX7BRDQARIsAMhYLP-gj1CV-51gk4siqO1X5-te0i6mtdPNeHASoKJq0L-L5li5tCCHng0aApDkEALw_wcB&gclsrc=aw.ds The suction cups required can be bought at target. Just remove the metal hook and snap into place. https://www.target.com/p/arrow-suction-cup-hook-multipack-8pc/-/A-13339972 When printing you must use support material. My cura support material settings were as follows: Support Placement: Everywhere Support Overhang Angle: 50 degrees Support Pattern: Zig zag Support Density: 15% Build plate adhesion: Brim 3mm wide
Statistics
Likes
2
Downloads
0