Leadnut adapter for RoBo 3D trapezoidial Z-axis threads Tr8x1.5
Description
This Is A Mod That Allows You To Change The Z-Axis Threads (Either Imperial Or Standard Metric) To Trapezoidial Threads (From Https://Hfbshop.De/, German Only -- Sorry). As Those Rods Come With Nuts That Have A A 17Mm Wrench Size You'Ll Need This Adapter To Make It Fit In The 13Mm Holes Of The X-Z Axis Brackets. Note: Depending On What Your Previous Rods Were (E.G. M8X1.25), You'Ll Need To Adjust The Steps Per Mm In Your Firmware, Otherwise Your Objects Will Be Too Large In Z Direction. M8X1.25 Has 1.25Mm Z Per Rotation While The Tr8X1.5 Has 1.5Mm. This Also Should Have An Effect On The Layer Height That You'Re Using In Your Slicer. I Usually Use Either 0.09, 0.12 Or 0.21. These Are The Layer Heights Without Z Rounding Errors. Check Josef Prusa'S Calculor Page.
Statistics
Likes
12
Downloads
0