Mini 3D Printed Magnetic Gear
Description
Assembly and Explanation: https://www.youtube.com/watch?v=nZX33zNqwGQ This is the new Magnetic gear design that is completely 3d printed aside from a couple hobby level hardware you can get on Amazon for under $15. All of the parts can be printed via FDM without supports. A 0.25mm or smaller nozzle is likely required for the resolution, and a brim is highly recommended. Required Hardware: -50x+ 3x2 mm neodynium magnets -12x #4-40 x 3/16" Steel (NOT STAINLESS) set screws (Can use 1/8"-1/4") -3x 5x10x4 mm Deep Groove Bearings If you have any questions I'm happy to answer!
Statistics
Likes
19
Downloads
0