RC10 front wheel bearing adapter hex crosspin
Description
This is an adaptor I created to allow older vintage style bearing-in-rim stadium truck rims to be mounted on more modern hex/cross pin axle. The adapter is basically a 3/16 x 5/16 collar that mates to a standard 4mm axle. If your front rim has a different center bore, you will need to modify it. I created this to work with an HPI stadium truck rim from the 90s. YMMV A standard 7mm hex nut should fit directly in the 5/16" outer bearing hole, keeping it from coming out. Good luck and drive on!
Statistics
Likes
3
Downloads
0