Rocket Fin Can for 29mm body tube
Description
I Have Flown This Several Times Past Mach 1 Since The Fins Are Perfectly Aligned Every Time. All You Have To Do Is Print It (10% Fill, Normal Speed Print, With Rafts) And Epoxy The Fin Can A Quarter-Inch Or So Above The Bottom (So You Can Use A Ring Of Duct Tape For Motor Retention) Of A 12" (Or Longer) Strong Body Tube (It Is Perfectly Sized For Blue Tube) And Tape A Golf Ball To The Top (Range Balls Are Free Nose Cone + Weight, Which You Will Need). If You Have Extra Epoxy, Lather It On The Fins For A Smooth Finish And Extra Strength. The Launch Rod Lugs And Fin Fillets Are Built Into The Print. Ready To Fly In 5 Minutes With Single Use Aerotech Motors (I Use The H135 Or H195 To Go Supersonic, But For Those Without Level 1 Certs, You Can Fly The G-Motors Just Fine). Launch Photos: Https://Www.Flickr.Com/Search/?Text=3D%20Print%20Rocket&Sort=Date-Posted-Desc&User_Id=44124348109%40N01 Here Is A Talk I Gave On 3D-Printing And Rocketry At Makerfaire: Https://Www.Youtube.Com/Watch?V=Ibmmpbpzeho Blue Tube Supplier: Http://Www.Alwaysreadyrocketry.Com/About-Us/Blue-Tube-2-0/
Statistics
Likes
34
Downloads
0