Orange Pi Zero Case (Extended)
Description
Case for the **Orange Pi Zero** with an **extension board** (Interface Board). It has an opening for the *GPIO-Pins* and holes for better cooling. Also there's an opening for the antenna, LEDs and the *IR-Receiver*. You'll need at least four M3-screws. My recommendation is to use *OPiZ-Bottom_2*, because it has openings for 4 screws, so you can use them as a stand. With this version, you'll need 6 M3-screws (2x inner, 4x outer). There's no need for nuts.
Statistics
Likes
3
Downloads
0