Ubiquiti Unifi UAP-nanoHD Round Wall Plate v3

Description

I wanted a solution to mount my Unifi Nano-AP to a wall box in my ceiling and use a keystone jack (so I could use one termination on the wire in the ceiling and if needed just change wall plates as the future needs change). I found many ideas on Thingiverse, but nothing exactly what I wanted. I originally created this: https://www.thingiverse.com/thing:4596960 After having it on the ceiling, I thought a round plate, instead of a rectangular plate would blend in a bit better. I used a 6” thin cat6 patch cable from Monoprice. To make it fit, I had to cut away the boot carefully with a Dremel and wire snips. Worked perfectly. For me, this all worked great. Gets the NanoHD almost flush to the ceiling (like the manufacture planned). I want to give some credits and thanks to the following people (as I re-used items from their designs and it can be seen in my file). Ubiquity UniFi AP ceiling box mount by DougTheBuilder https://www.thingiverse.com/thing:4544201 Note: I printed this design and I used his keystone mount in my design. His keystone was a better fit from the one I originally tested, so I re-used it. Mounting Ring: Ubiquiti UAP-AC-LR UAP-AC-LITE UAP-nanoHD Twist Off Mounting Plate by jordan_woyak https://www.thingiverse.com/thing:2819858 Note: I corrected the thickness of the plate (to match the original plate), the tab also needed to be widened. Note 2: I spun the mounting screw holes 45 degrees to use as posts for strength to the wall plate (possibly overkill).

Statistics

Category

Tags