IRC Ghost qTee mount 28mm Standoffs
Description
Wasn't happy with just mounting the qTee under an arm so made this! Made for my Ummagawd remix but I suppose could work with any front/side >28mm standoff. Still a V1 product so will be updating in the future, I also only had PLA+ to hand and it worked perfectly for that, but TPU is recommended For PLA+ I used; 0.1mm layer height 100% infil 65mm/s Print speed 15mm/s initial print speed 205C Nozzle/60C Bed
Statistics
Likes
4
Downloads
0