Battery Adapter for LR43 to LR44
Description
This is my first thing here, so I´m very happy about feedback, but not necessary due to its simplicity :) I needed an adapter for a LR43 Battery, because the housing in the device needed a LR44. The lid (when closed) gives some pressure to the Battery, so that the Battery gets tight to the eletrical contacts. Regarding the specification on wikipedia (11.6mm * 4.2mm (LR43) and 5.4mm (LR44), the gap to fill should be 1.2mm. I only reduced the diameter, so that it could be removed easily, even if there was a clip or holder (or something like this). So it has the dimensions 11.0 mm in diameter and 1.2mm in height. It also has a little chamfer. In my case, i didn´t have to do anything after printing (no sanding, grinding etc..) For me it worked well. If it doesn´t work for You, please leave a comment
Statistics
Likes
0
Downloads
0