DRONE FRONT BUMPER for STRETCH X5 V2 / ASTRO X5 JHONNY FPV
Description
This a TPU front bumper to protect your FPV camera adapted for the Stretch X5 V2 or Astro X5 jhonny fpv frames. -If you have a Bowden printer you might have to do some upgrades to pint TPU. -You might have to adjust the holes to fit your frame properly. Print settings: -Layer height: 0.2mm -wall line counts : 2 -Top/Bottom layer: 4 -Printing temp: 210°C -Heated bed temp: 60°C -Brim -Retractation distance : 8mm (or higher) -Retractation speed: 25mm/s (or higher) -Print speed: 35mm/s -Travel Speed: 80mm/s -10% Support. Enjoy!!
Statistics
Likes
0
Downloads
0