Ultimate Anycubic Predator Effector (V6 & 4010 fans)
Description
Let's face it, the stock AC hotends are crap... This project started as the solution to house a E3D V6 on the predator, but no "perfect" solution was available. The keypoints were: No air leak on under the effector to minimize warping Solid, adjustable connection points going through the effector 40mm hotend fan and dual 4010 radial fans for part cooling Light construction, especially designed for printing in "warpy materials like PA/PC/ABS" The design features an enclosure for the hotend, allowing the air to pass through the hotend without flowing under the effector. Due to limitations in available space, the effector faces "backwards" blowing air at the front, so don't be alarmed... The effectors used M3 rods going through the body and connect the delta arms, and needs 4mm spacers between the effector and the arms (this is done by an M3 Nyloc nut as seen on the pictures). This allows you to fine tune the distance between the arms to be 64mm and have the effector be squared (triangled??) Alternatively, you can use regular M3x30 or longer bolts to attach the arms, but you still need the 4mm spacer between the effector body and the arms. Below is a list of items you need for the installation, some can be found on the original effector assembly already. 1x set of parts printed... 1x E3D V6 bowden (full metal or the Lite) Main body 3x M3x88 threaded rod 6x M3 Nyloc nuts (~4mm thick) 6x M3 washer (optional) 6x M3x30 bolts or longer (optional to use instead the 88mm rods) Clip 2x M3x15 bolts (can be longer) 2x M3 nuts Level Probe 2x M3x8 bolts 2x M3 nuts 1x 10x2mm magnet or steel round 1x 10x20x4mm square magnet or steel flat (for the Probe_Mount_Flat) Fan Ducts 4x M2x5 bolts (M2x8 recommended without the inserts) 4x M2 Inserts ~3,5mm OD (optional, only for the Insert version of the effector) Fans 4x M2x5 bolts for the part cooling fans 4x screws for the hotend fan Toss a like, drop a tip and maybe follow <a href="https://www.thingiverse.com/Superbeasti/designs">me</a> over at the IG's or YT https://www.instagram.com/superbeasti/ https://www.youtube.com/channel/UCjYzBKKl0BfKuw2VQgK8AQg
Statistics
Likes
46
Downloads
0