Trump Pumpkin - The Trumpkin
Description
Donald Trump as a human-pumpkin hybrid, I'd recommend painting it a deep orange with several coats, you can probably use the same paint for Trump and the pumpkin at this point. Keep the infill fairly low if you want to be able to see it glow, otherwise you can fit a proper lamp. It's probably not a good idea to use an actual candle if you're printing this in PLA, try LEDs instead unless you're going for a melted look. The print shouldn't need supports but if your printer isn't fully dialed in then tree supports should be fairly easy to remove from this.
Statistics
Likes
3
Downloads
0