Mingda D2 4020 Fan Adapter + Fan Duct
Description
A 4020 adapter plate that uses no additional mounting gear and has a couple fan duct designs. In order to fit the fan you'll need to remove the grill that goes on top of the extruder, that is why I included a cable plate that bolts the same way using the default screws. Installation order: 1. Replace the protective grill that's on top of the extruded with CablePlate.stl 2. Remove the 4010 fan and reuse the bolts to put MountingPlate.stl 3. Put ONLY the left screw of the duct of your choosing, as seen on the image I use the simple duct. 4. With the duct tilting on one side put the fan by first securing the top clip on the MountingPlate.stl and then the duct below. 5. Screw in the second bolt of the duct. Note: the 4020 fan must have a hole at the top as shown in one of the images.
Statistics
Likes
6
Downloads
0