Elegoo Mercury Wash & Cure to Epax X1 Build Plate Adapter
Description
Threw together this simple adapter to connect the Epax X1 build plate to the Elegoo Mercury Wash & Cure station. This slides into the adapter bracket that comes with the Elegoo and holds a M4 x 10mm x 6mm knurl in place that you can press in with a soldering iron. I made the hole 5.5mm for a 6mm diameter knurl. You will need to drill a 5mm hole which you can easily mark once you print this. Rounded corners go in first if it wasn't obvious. You might need to very slightly file the corners to get it to fit, depending on how dialed in you have your printer. I bought an M4 thumbknob and glued a washer to it I had lying around. Knurls: https://www.amazon.com/gp/product/B0784VYCYY Thumbscrew: https://www.amazon.com/gp/product/B07VSD3VYD
Statistics
Likes
0
Downloads
0