Mi Home Camera 360 support (Xiaomi)
Description
I put my security camera on a tall closet, but I couldn't see the whole room, so I made a 20° support to compensate the missing angle. All you need is the two printed components and 2 wood 3x16mm screws. Note: the lock has 4 holes in order to be repurposed. For this mount you only need two. #### Slicer Settings **Support** - 0.3mm layer thickness - 1.2mm walls - 0.9mm top/bottom - 20% infill for the support - speed 60mm/s (30mm/s on the walls) **Lock** - 0.15mm layer thickness with adaptive layers - 1.2mm walls - 0.9mm top/bottom - 30% infill - speed 40mm/s (20mm/s on the walls) - Brim
Statistics
Likes
95
Downloads
0