Alfawise U20 - Z Home Extension
Description
The Problem: ========== The stock bed is usually not perfectly flat, because of that you can sometimes struggle to have a consistant first layer adhesion. My Solution: ========= This extension to allow you to move your Zhome up 3.75mm. It allows you to use a magnetic bed with 6mm glass under it _(for uniform leveling, 4mm may be to unstable)_. Print it, free it from its support and you can clip it under your red metal plate that touches your Z limit switch! DO NOT FORGET to reduce your maximum Z height in your slicer or Marlin, otherwise your printer might try to reach over its current maximum
Statistics
Likes
1
Downloads
0