Customizable Top Loader EDH Deck Box
Description
Remixed to allow box to be EDH sized (100 sleeved cards), since the original parameters of the box were not customizable enough. I also raised the amount the top loader guards come up since it could slip out with some slight pressure, and I raised the amount the top loader top comes in so that the top loader could not be forced through the lid. I've uploaded 2 example STLs I've printed, a shorter one which has cards that must be face up/face down (green and gray examples) and a taller one that has cards that can be sideways or face up/face down (multicolored example). They both work with my single (dragon shield and eclipse) sleeved EDH decks and both contain a little extra room for some tokens. I've found I can fit about 5-10, depending on how much I want to squish things. I've also included the openscad file in case someone wants to further remix/customize. The deckbox for any orientation is using 68 for the deck width and thickness and 93 for the deck height. 3/13/21: I uploaded a v2 of the scad file that allows for a much taller deck box. This allowed me to make a box that stores the deck vertically and (in tinkercad) add a divider to allow a separate storage section while still having the entire box close via a top loader. I've uploaded the example STL I made - the storage container is big enough for a normal sized spindown d20 or a bunch of tokens. This is the purple deck box photo. 7/30/21: Uploaded an additional file containing just the two top loader blockers, since I had some print out poorly when I was messing around with wall count.
Statistics
Likes
24
Downloads
0