The SE III: A Speedcube 3x3 by Smitay Enterprises.
Description
The SE III: A speedcube 3x3 inspired by the Valk 3 and various Gancube designs. Designed in Onshape using NK Cubed's tutorials. https://www.youtube.com/watch?v=9x5eNu4F3JM&list=PL_SHChnRnrajqXB-4G5chHlYqlrGHmt95 Printed by Shawn from SpeedCubeReview! https://www.youtube.com/watch?v=c5u_fZ0IDpg A quick average of 5 on this cube: https://www.youtube.com/watch?v=gKxcN76-Jvc YOU WILL NEED: 8 x Corner Pieces 12 x Edge Pieces 6 x Centre Pieces 6 x Centre Caps UPDATE 11/11/2020 The centres of the old design (SE III.1) fell out very easily, this has been fixed in the new version (SE III.2) with two new centre cap designs. The cap with a bevel on the underside works fine for me (new cap), but if you have any issues with it, you can print one without a bevel (tight cap). The corners have larger feet now, more similar to modern speedcubes. All the pieces now have larger 'cuts' in them, enabling more corner cutting. Shawn from SpeedCubeReview mentioned in his video that his magnets didn't fit in the holes and the centres were tight on the screws (probably printer tolerances, everyone's printer including mine is different). The new parts have slightly larger holes, solving this problem. I have also included 5 gcodes for the 5 parts (Ender 3, but may work on other printers). These have the best orientation, resolution and bed adhesion that I have come up with for each different part. The corner and edge files will need to be printed twice. Please note that parts from the two versions are NOT interchangable! Happy printing!
Statistics
Likes
27
Downloads
0