WinDIY - A (mostly) 3D printable wind-turbine
Description
# WinDIY - 3d printable wind turbine WinDIY is a wind turbine made of mostly 3D printed parts. ### Features - Wind turbine build from 3D printed parts - HAWT design - Rotor diameters from 0.5 to 1.2m possible - 3D printed wings - Uses a 3D printed disk generator for energy generation - Safety functions through active pitch adjustment of the wings, mechanical brake and electronic brake function via the disk generator - Can be printed using any "normal" (20x20cm bed size) FDM Printer ### Pictures  ### Build instructions You can find detailed instructions on Nerdiy.de. - General information: https://nerdiy.de/en/windiy-die-wind-turbine-aus-dem-3d-drucker/ - Build the wings: https://nerdiy.de/howto-windiy-fluegel-der-windturbine-aufbauen/ - Build the wind vane: https://nerdiy.de/howto-windiy-windfahne-zusammenbauen/ - Build hub: https://nerdiy.de/howto-windiy-nabe-inkl-mechanik-aufbauen/ - Build the rotating tower: https://nerdiy.de/howto-windiy-drehturm-aufbauen/ - Build main axis: https://nerdiy.de/howto-windiy-montage-der-hauptachse/ - Build pitch actuator: https://nerdiy.de/howto-windiy-pitch-aktor-zusammenbauen/ ### License Unless otherwise stated, all works presented here and on Nerdiy.de that are not based on software/code are subject to the CC BY-NC-SA 4.0 license (attribution – non-commercial – dissemination under the same conditions 4.0 international). You can find additional infos here: https://nerdiy.de/en/lizenz/
Statistics
Likes
66
Downloads
0