LowRider2 - case for SKR or RAMPS
Description
This is a case designed to attach to the Y-plate on the LowRider2 CNC. It fits to the 4 screws on the upper and lower corners of the Y-plate. In this Version i wanted to integrate a bigtreetech skr1.3 board and also a dc converter as you can see on the photos. The holes are ready for gx16 connectors and there are also slots for the usb, sd card and wifi adapter of the skr board. In my case i use it as cable box because i have an external controller and stepper motor driver. If you do not need all of the gx16 holes then you can use the cover which i added to the print files. On the cover there are holes prepared for a 120mm and 80mm ventilator. Depending on the fitting of your skr board you can mount the ventilator inside or outside on the case. If you have driver installed maybe you have to place the ventilator outside.
Statistics
Likes
11
Downloads
0