Prusa i3 MK3S Corner ENCLOSURE - Ikea LACK table
Description
Just my design of a IPrusa i3 MK3S Corner ENCLOSURE - Ikea LACK table from the 4mm plexiglass. It is not a tightly closed cabinet. There is a small gap about 2.5mm between plexi and LACK table. Video instructions can be found on youtube: https://youtu.be/S5HYBOylQ7I What you'll need: Print : 1x Prusa_Enclosure_Top_Corners 1x Prusa_Enclosure_Bottom_Corners 1x Prusa_Enclosure_Top_Internal_Reductions.stl 2x Prusa_Enclosure_Door_strip 1x Prusa_Enclosure_magnet_holder_and_handle 1x Prusa_Enclosure_Filament_guide 2x Ikea_TopSpoolHolder Plexiglass dimensions: 2pcs: 438 x 488 mm, thickness 4mm White Lacquered MDF Board (or Standard Hardboard) dimensions: 2pcs: 443 x 447 mm, thickness 3mm Neodyme Magnets: 4pcs: N52 (or N38) disk 8x3mm 4pcs: N52 (or N38) disk 8x2mm Screws and Nuts: 6pcs : Original Ikea Lack screw 3pcs: 8mm / M8 x 30 Wood to Metal Screw 3pcs: 8mm / M8 x 20 Wood to Metal Screw 3pcs: M8 x 30 Long Rod Nut 12pcs: M3 x 6 1pcs: 6.1mm X 14.5mm System Screw (#7 x 14.5mm Deep Thread System Euro Screws) 1pcs: 5mm x 10mm System Screw Other: 10mm aluminium rod Tools : 2.7mm, 4mm, 6mm, 8mm, 9mm, 10mm drill 15mm forstner drill bit Philips screwdriver Torx screwdriver Wrench 13mm 3D printed drill jig for embedding magnets (file Prusa_Enclosure_magnet_holder_drill_jig)
Statistics
Likes
14
Downloads
0