Flux Capacitor Electronics addon cover
Description
Here is a removable Electronics back panel for the mini flux capacitor. This has 2 parts, an inner wall bracket and the cover itself. I have put in a hole to run a usb cable through or just for wiring purposes, or you can put in other holes for a momentary switch or something else. How to build Place the inner wall bracket around the existing battery hole and glue in place, let the glue thoroughly dry run whatever wiring or electronics you need run any cabling through the cover before connecting to the LED's the back cover will friction fit to the inner walls that are glued down allowing you access to the electronics for batter replacement or repair at a later time I took inspiration for this from: https://www.thingiverse.com/thing:3930223 but I didn't like the 1+hour print time and that it was permanently fixed to the panel which allowed no repairs so I built my own, thinner, and removeable. This will print in about 3 minutes. No supports needed, you may want to sand the edges a fraction for the fit that best suits you.
Statistics
Likes
4
Downloads
0