Hanging Wall Photo Grip Clip
Description
I have a bunch of these 5x5" photo cards lying around (from those companies that print "photo book series") and I wanted to display a bunch of them in an easy way with minimal holes in my wall. So I designed these "grip clips". They have very small teeth inside that will gently grab your photo card so you can chain them together and hang them from a single nail. Some notes / ideas: * I've hung (dangled?) up to 5 photos with this. * If you added another "top clip" to the bottom, you could probably do a longer chain * You could probably add clips to the sides of photos to make a whole grid of photos! Just make sure you have enough anchor points! * You could probably attach some double sided 3M mounting foam/tape to the back of one of the clips instead if you didn't want to put a hole anywhere * For that matter, sticky tack might work too! * The hole is designed to be very small and just fit a finishing nail (around 1" long). It should hold just fine if you nail it into drywall/sheetrock, you shouldn't need a stud or anchor. You'll need a printer with a 0.4mm nozzle diameter or smaller. Any larger and you will lose too much detail and your photos probably won't grip correctly.
Statistics
Likes
1
Downloads
0