Meter Housing
Description
I've been holding off on publishing this because some of the stl files haven't been compiled by thingiverse to display the thumbnail. I have uploaded both ASCII and Binary versions in an attempt to get thingiverse to create the thumbnails but not much success. I've downloaded the stl files and they don't have any issues that I can find so I have decided to publish this design anyway. Housing I used for the analog meter for my K40 Laser. I know the meter should be a 0 - 30 ma but I had a 0 - 50 at the time. Since creating this I purchased a 0-20 ma meter as I never go over 15 ma when using the laser and it fit the housing perfectly. I recommend printing the meter fit test file to verify that the meter you are using will work with this housing before printing the housing. If your meter doesn't fit I have included the RSDOC file so it can be modified as needed. (DesignSpark 5.0) The meter mount has a place for a wire tie to hold the wiring in place and recess for 8mm x 3mm (Harborfreight) Magnets to hold the housing on the laser while making it easy to remove for quick access to the laser tube area. I've tested the meter with and without the magnets and I haven't seen any difference in the meter deflection but you may want to test this yourself before gluing the magnets in place.
Statistics
Likes
8
Downloads
0