FPV Monitor Mount Holder & Foldable Stand (Radiomaster TX16S, Jumper T16, Desk)
Description
Here we have a special mount/holder to attach a fpv monitor to the popular remote controls "Radiomaster TX16S" or "Jumper T16". The rc holder is splitted into three parts: "mount", "base" and "tilt". The "tilt" is designed for the well-known, very cheap and generic 4.3" fpv monitor. For this monitor i designed a replacement for its "rear casing" which matches the "tilt" - it also has an extra "button" to reach the channel switch. the holder can be used for other models too - the "tilt" and possibly the "base" would then have to be modified. Additionaly ... i designed a "stand" with "tilt" for your workbench. Note: Print the rc-"base", rc-"tilt" and desk-"tilt" with their left/right side down ... and use supports. the rc-"mount", desk-"base" and monitor-"rear casing" should be printed with their flat side down. the rc-"mount" and monitor-"rear-casing" needing supports too. the battery can be fixed in position by attaching a piece of foam to batteries bay of the monitor-"rear casing". Screws: Use M3x16 as minimum - M3x20 knurled thumb screws are recommended. Put serrated lock washers on to the thumb screws to get a stronger grip for the "tilt". Update: A maker has inspired me with the idea that the rc-"mount" could also be used as a stand. so then i remixed the rc-"mount" and rc-"base"a little and created a new functional foldable stand. the foldable stand offers you two different hights.
Statistics
Likes
34
Downloads
0