H0/HO scale 1:87 Wind generator / wind turbine
Description
Hello, I needed some wind generators for may train layout. I just found some wonderful design here: https://www.thingiverse.com/thing:2077537 I scaled it down a bit to match the HO scale, redesigned the hub, the blades and the nose and made a new pole. The generator is designed to be fit with a geared motor - about 60 rpm at 12 volts, so it gives a realistic rotation. The motor can be purchased from here: https://www.aliexpress.com/item/4001273719755.html?spm=a2g0o.detail.1000014.27.7744764asmP7jc&gps-id=pcDetailBottomMoreOtherSeller&scm=1007.13338.177931.0&scm_id=1007.13338.177931.0&scm-url=1007.13338.177931.0&pvid=86669e31-e74f-4b5b-9fde-c86522436118&_t=gps-id:pcDetailBottomMoreOtherSeller,scm-url:1007.13338.177931.0,pvid:86669e31-e74f-4b5b-9fde-c86522436118,tpp_buckets:668%230%23131923%2341_668%23808%234094%23598_668%23888%233325%238_3338%230%23177931%230_3338%233142%239890%2310_668%234328%2319937%23754_668%232846%238116%23908_668%232717%237567%23938_668%231000022185%231000066059%230_668%233422%2315392%23388 You will also need 4 pcs 3 mm screws to close the body shell. It is work in progress, as I haven't printed and tested it yet.
Statistics
Likes
154
Downloads
0