Slimline Spoolholder with Pulleys/Bearings
Description
Print ==== Print four parts overall. Each side consists of two parts facing eachother. 30% Infill and 2 bottom/toplayers are enough to be pretty torsion-resistant. BOM: ==== 8x M3x12 Screws + Nuts 4x Toothless Pulleys with 5mm Bore Assembly ==== The M3 screws need to go in the holes with the spacers behind. The Bearings on the solid spacers on the top. The additional holes may be used to connect both elements of the holder with a threaded rod to prevent shifting. _3mm Bearing version will follow_
Statistics
Likes
0
Downloads
0