Ender 3 Universal Endoscope Mount - Close Up
Description
Remix on the endoscope mount by rwmech I adjusted this so the opening is much larger to account for my more types of edoscopes and just removed the bottom so that you can just click in to the top. In order to account for positioning and continued grip, I also added a loop at the top to pull in with a ziptie I also reinforced the screw hole since I had mine break off a few times. The required materials stays relatively consistent with: - 1 m3 * 12mm screw - 2 or 3 cable zip ties (you don't really need to use 2 zip ties on the top, but it can minimally help with wobble Endscope that I use - https://www.amazon.com/gp/product/B083FVBN48/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 This should work with most if not all endoscope sizes. If you have trouble fitting yours, I found that using an exacto knife to increase the opening works too should be printable without supports - optional depending on printer I suggest a higher infill for durability and long term usage
Statistics
Likes
5
Downloads
0