Low Profile DJI FPV Rapidfire Mod
Description
This is my mash-up of [two](https://www.thingiverse.com/thing:4068346) [different](https://www.thingiverse.com/thing:4121260) DJI FPV faceplates to create a low profile faceplate. Most rapidfire mods add quite a bit of bulk to the front and prevents it from fitting into the included soft bag or backpacks. I wanted to shave off a bit of the dead area in the front by moving the module closer to the faceplate. I added a layer of kapton tape to the back of the module to make sure it wouldn't short on the back of the screen. I added a file with minimal supports to speed up printing and would break off easily. Printed with a 0.5mm nozzle, but 0.4mm should be fine as well.
Statistics
Likes
13
Downloads
0