Ring my Bell - another Doorbell Plate
Description
My new Anycubic Mega Pro supports multi-color printing with a new menu item in the settings. That worked well, but the filament has to be changed by hand because the corresponding menu item is unfortunately blocked during printing. The front panel of the doorbell plate is printed in two colors. The filament was changed at 2.2mm. I used 16mm push buttons. The front and back are held together by the union nuts of the pushbuttons. In addition, I filled the holes with hot glue. I used icons from https://www.flaticon.com/de/kostenloses-icon/die-gluhbirne_900551?term=licht&page=1&position=78 and https://www.flaticon.com/de/kostenloses-icon/alarm_2088683?term=ringing%20bell&page=1&position=58
Statistics
Likes
4
Downloads
0