Bow / Crossbow PVC string making tool / jig
Description
I designed this so if I break a string on my crossbow I don't have to rely on China to send me another and wait for weeks. Now I can make as many as I want with some string, a little wax and some time. You could use a board with some nails in it but why when you can have something more useful? Plus with these you can keep them with you and if your string breaks on the road you can just trim a long enough stick or pick up some PVC and you are set to go. You will need to print 2. I printed both at 100% infill in PETG but PLA or PLA+ should work. I just had PETG loaded already. I also printed these with a 0.8mm nozzle for speed as cosmetics is not really a concern with something like this but you should be able to make a functional tool with any size nozzle. They fit loosely on 1 inch PVC pipe. If it is too lose just put 1 layer of tape around the pipe to make it snug. This will require some math. For example the string I made for my crossbow is 17.1 inches long. To get this I have to had a PVC pipe 17 7/8 inches to get the right size. So cut your pipe on the longer side and you can trim to fit. This has numerous tie off points. Please print as shown in the photo for max durability as you will be putting it under tension. You should be able to use this to make everything from 50lb pistol crossbow strings to full size recurve bow strings with this tool. The string shown in the photo is made with pre-stretched mason line from the local hardware store and some serving string I ordered from Ebay. The white stuff in the photos is bee's wax. I over wax when I first make a string to make sure everything is coated.
Statistics
Likes
1
Downloads
0