Tripod Mount Offset for Ender 3 Bed Mount
Description
Just in case there is someone else that uses the accessories on an Ender 3 Pro that I do, you'll find an issue with clearance between your bed handle mounted camera and the Bullseye light bar. So, I made this offset to compensate. The accessories on mine: Yes, even with the camera and all this, there is no issue with clearance above da_syggy's Y-Axis Bar Rail Cover: https://www.thingiverse.com/thing:3476490/files Bullseye fan mounts and ducting: https://www.thingiverse.com/thing:2759439 And my (dps_design) 100mm LED Mount Strip https://www.thingiverse.com/thing:4637631 Ender 3 Strong Tripod Style Bed Mount by Boredom3D https://www.thingiverse.com/thing:4541695 Then, this Offset attaches with 1/4 x 20 to both bed mount and to: GoPro Tripod Mount by tmorris9 https://www.thingiverse.com/thing:81333 To that I've attached GoPro Extension gpm_bar50.stl from: https://www.thingiverse.com/thing:62800/files That connects to my (dps_design) Pi IR Camera mount: https://www.thingiverse.com/thing:4596372 Which attaches finally to jouwstrm's raspberry pi IR camera mount: https://www.thingiverse.com/thing:3541864 The holes are not threaded, but tight on a 1/4 x 20 screw. Use a nut on the backside if you need - back is hollowed out to fit a large nut if needed. You can see from the pictures that I printed mine in total crap resolution - but it's hidden and therefore doesn't matter to me.
Statistics
Likes
2
Downloads
0