Quadcopter 250 Frame
Description
A Model Of A Quadcopterframe Very Close To The Qav250 Frame. You Can Print It With The .Stl-Files Than The Frame Is 3Mm Thick, Otherwise Lasercut It With The .Dxf-File. Feel Free And Enjoy! Please Just Use Max. 5" Props Otherwise It Will Collide With The Body. ###Update #1: Had To Change The Holes For The Lower Plate Otherwise The Escs Wouldn'T Fit. It Is Not A Real Power Distribution Board Since I Have No Clue How To Paint Conductor On The Board. But If You Can Feel Free To Tell Me How It Works And Of Course To Do It On Your Own Board :) ###Update #2: As You May Read, I Just Finished Building My Model And Recognized That The Arms Are To Weak. Thats Why I Change Them A Little And Hope They Hold Better. Also I Have A Hint For You. Dont Use High Density Fiberwood As It Is Too Flexible And Breaks Easily. If You Have The Opportunity Too Use Different Material Than I Have At This Point, I Would Say That Pc Or Carbonfibre Are More Reliable Due To The Fact That Tey Are Not That Flexible And Are Not Breaking That Easily (After Small Crashes).
Statistics
Likes
84
Downloads
0