Beer Crate
Description
Needed something to store my kids pixi books. I could not find anything I liked so I made this. It is modeled after an old Swedish beer crate. I have a model also with Pripps logo on it. Will upload as soon as I have tested it. Internal dimensions 102*102mm, books are 100mm so it fits snug. Printed without support. Will take approx 50 grams of PLA and take about 10-11 hours to print. 201103: added a version with solid bottom if you want to use for snacks ;) 201220: added a model if you want to stack them. Just print and glue to the bottom. Print at 132% for beer can, 100% for normal 201223: added models for Carlsberg and tuborg, a square version that fits on the props back, and one version that has original proportions. But still will fit pixi books ;) I have not had time to print all version so please check before printing. 201229: added tuborg scaled for 4 beer cans. They are scaled and the details are made thinner so they should work without support. Please tell me if it does not=) 201230: added a correct Carlsberg scaled for 4 beer cans. First version was not correct. And also added a props scaled for 4 beer cans 210101: added crates with no logo for 4 beer cans. For people wanting to do their own logo. I think you can open stl files in tinkercad and add logo. 210104: versions with no logo and solid bottoms uploaded
Statistics
Likes
369
Downloads
0