eufy 2K Indoor Cam Enclosure for Outdoor
Description
I recently purchased the Eufy off amazon because it was very cheap, I have the YI Home outdoor cameras but they are not 2k. Since the Eufy camera was meant for indoor, I designed an enclosure to be used outdoors. There are (2) variations of the design for the Eufy Security 2K Indoor Cam https://is.gd/02WXIi (#ad) **Update: 01/06/2021** - Added both Stock Mount & 3rd Party models to support ceiling mounted when the camera is mounted upside down. If you are planning to mount from the ceiling, use the "reversed" models. **Update: 01/06/2021** - Added chamfers to the sun visor models to be printed flat and not vertical. **Update: 01/07/2021** - Corrected model "Eufy2kCamera_StockMount_Backplate_v3.stl" **Stock Mount** - These are to be used with the mount/stand that comes with the camera. 1 x Eufy2kCamera_StockMount_Enclosure_v3.stl 1 x Eufy2kCamera_StockMount_Backplate_v3.stl 1 x Eufy2kCamera_StockMount_Sunvisor_v3.stl (optional) 1 x Eufy2kCamera_StockMount_Sunvisor_Extended_v3.stl (optional) **Ceiling Mounted - Reversed Models** 1 x Eufy2kCamera_StockMount_Backplate_Reversed_v3.stl 1 x Eufy2kCamera_StockMount_Sunvisor_Extended_Reversed_v3.stl (optional) 1 x Eufy2kCamera_StockMount_Sunvisor_Reversed_v3.stl (optional) **3rd Party Mount** - 1/4 Thread - These are to be used with anything 3rd party security, some additional hardware is required. See Note Below. 1 x Eufy2kCamera_3rdPartyMount_Enclosure_v3.stl 1 x Eufy2kCamera_3rdPartyMount_Backplate_v3.stl 1 x Eufy2kCamera_3rdPartyMount_Sunvisior_v3.stl (optional) 1 x Eufy2kCamera_3rdPartyMount_Sunvisior_Extended_v3.stl (optional) **Ceiling Mounted - Reversed Models** 1 x Eufy2kCamera_3rdPartyMount_Backplate_Reversed_v3.stl 1 x Eufy2kCamera_3rdPartyMount_Sunvisior_Reversed_Extended_v3.stl (optional) 1 x Eufy2kCamera_3rdPartyMount_Sunvisior_Reversed_v3.stl (optional) #Hardware required: 4 x M3x10mm screws 4 x 3x5mm(L)-5.4mm(OD) Metric Threaded Brass Knurl Round Insert Nuts https://is.gd/S5sMKS (#ad) #Hardware required for 3rd party mount. 1 x Threaded Insert, 1/4 inches-20 x 6mm L x 8mm OD Female Thread https://is.gd/QIOltZ (#ad) 3rd Party Outdoor Mounts I used. https://is.gd/XxZeep (#ad) - 4 Pack Indoor/Outdoor Security Camera Wall Mount 26ft USB cable that worked with this enclosure if needed. https://is.gd/6Zh1vZ (#ad) Notes are below with the images, you'll need to heat up the push fittings to insert into the plastic parts for the mount.
Statistics
Likes
34
Downloads
0