Moana's heart of te fiti
Description
I redesigned the bottom piece of the remix that Billy_McGivern did so to fit a small 1p2t switch inside as well as have a enough depth for the cr2032 coin cell battery I used and a white LED. Soldered all together and glued everything in place. Also has a hole for string to go through to tie to necklace or carabiner. This was used for a prop in a musical that contacted me about making it. Works really well! Switch is so small in back side that you can't see it from a few feet away even let alone a stage distance. Hope this helps someone save a few hours of time :) COMPONENTS: Battery: https://www.amazon.com/gp/product/B071D4DKTZ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Battery Holder: https://www.amazon.com/gp/product/B07FXBB27Y/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 Switch: https://www.amazon.com/gp/product/B07BD1SPYG/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1 Filament: https://www.amazon.com/gp/product/B071XW5J6D/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 Wiring: I soldered the positive lead of the battery holder to the middle lead of the switch, then one of the two negative leads of the switch to the positive side of the LED, then the negative side of the LED to the negative lead of the battery holder and it worked as a closed circuit. Remember to use electrical tape or heat shrink tubing around all open wiring and leads so to not have a short circuit. Have fun! :)
Statistics
Likes
2
Downloads
0