Filament runout sensor for Ender3
Description
This is yet another filament runout sensor It is my remix of this [design](https://www.thingiverse.com/thing:3035553) for my Ender3 and keeps a clear view of the filament. It is merged with this [sensormount](https://www.thingiverse.com/thing:3674501) which provides a solid fixation. Instead of an optical sensor I use a small magnet on the lever and a reed contact - e.g. this kind of [door switch](https://www.amazon.com/xin-sheng-MC-38B-Embedded-magnetic-Security/dp/B077SFDTJF/ref=sr_1_2?dchild=1&keywords=Magnetic+Gap+Switch&qid=1604240006&sr=8-2) Filament runout is simply detected when the lever with magnet falls down and activates the the reed switch. Two small pieces of PTFE tube (6mm outside diameter) ensure smooth guiding of the filament. Disabling the sensor - for e.g. filament change - can be done easely by flipping the lever backwards. The hole in the middle of the lever allows 4mm retraction of the filament before turning off the power of the printer. The reed contact is connected to a Raspberry Pi with OctoPrint. I use the "Enclosure plugin" to issue the following commands to my printer with Th3d firmware; > ;------------------------------------------------------ >M117 Filament Run-out ;Display text >M410 ;Quick stop - Abort all planned moves. >G91 ;Relative positioning >G1 E-4 F2700 ;Retract a bit >G1 Z15 F300 ;raise Z 15mm >M400 ; Finish Move >G90 ;Absolute positioning >;------------------------------------------------------ >; just for sure - in case PowerOff will fail: >M107 ; Turn off the part cooling fan >M106 S0 ;Turn-off fan >M104 S0 ;Turn-off hotend >M140 S0 ;Turn-off bed >M84 X Y Z E ;Disable all steppers >;------------------------------------------------------ >M81 ;Send PowerOff -> MQTT message to NodeRed >M0 Filament_Run-out ; Stop and wait >;------------------------------------------------------ The MQTT message from the OctoPrint MQTT plugin triggers via NodeRed a [Sonoff socket](https://www.itead.cc/smart-socket.html) to switch off the power of the printer See demo on [youtube](https://youtu.be/sr3bQMRs-pA)
Statistics
Likes
6
Downloads
0