AIR INTAKE- Ender 3 Pro Fan Cover //Aeronautical Remix//
Description
This is a simple remix to bring to your printer an aeronautical look. Text and font are inspired by aircraft engine inscription "AIR INTAKE" I've seen many time. It's a very easy way to customize your printer to look cooler :) Performance of the ventilation cover are the same as the cover I remixed. So the cover blind a bit the ventilation noise but don't attempt to have a silent machine after mounting this part. Hope this part would be helpful ! -> Mounting instruction described bellow. Mounting instruction : 1/ Unscrew ONE screw on the face side of your alimentation box *the two screws are located on the same side than the yellow sticker "AC Input"* 2/ Face the ventilation cover in order to have only one hole of the ventilation cover in the axis of the AC box hole. 3/ Tight the screw you previously remove *wait to install the two screws to apply a tighter torque* 4/ Rotate the ventilation cover in order to face the hole of the ventilation cover in the axis of the last AC box hole. 5/ Insert the last screw and apply final torque to both of them. *you don't need to have an important torque, the purpose is to have a fixed, non-moving part*
Statistics
Likes
5
Downloads
0