Oculus Rift sensor ceiling mount
Description
This is a ceiling mount for the Oculus Rift sensors. I live in an area that has the occasion earthquake so double sided tape or the slot-insert mount don't work for me. The sensor's desktop stand snaps into it. There are the three pieces to each mount so if you have two sensors print each piece twice. BracketBraceTop.stl BracketBraceBottom.stl These two pieces have a notch in the center so they fit together at a 90 deg angle. These are the pieces themselves that the supports snap into, so I recomment printing these in PETG because it's a little more bendy. BracketCenter.stl This piece serves as as spacer between the sensor base and the cieling. It also keeps the bracket base bottom and top at a proper perpendicular angle. You can print this pieces in really any material, I used PLA because it's fast. With all three pieces printed put them together as in the pictures. The center hole in all three should line up. It's designed to fit a 3mm toggle bolt but you could use a long screw too if you want.
Statistics
Likes
0
Downloads
0