Ender 3 Bltouch Ver 3.1 Protective Cover Mount
Description
This is a protective cover / mount piece for the Ender 3 bltouch version 3.1. The mount has enough length cover the probe when retracted. It should extend outside the cover when the probe is deployed. Hopefully this will give the probe needle a little extra protection when the printer head is moving. The length should be perfect for the bltouch 3.1 ,but if it's too long you can always file the bottom end a bit. The remover is to be used if you need to remove the bltouch from the mount. This way you don't damage the probing needle accidentally. Works best with standard m3 screw and nuts not included in the bltouch kit. The bltouch kit comes with m2 screws. 1/26/2021 - Added the bracket. Slim and a little thicker. Print this at 100% infill. Forgot this piece was missing until someone pointed it out. If you have a metal bracket that came with the kit you can use that. Printed in SPLA , works with petg, and pla. Resolution .4 mm nozzle and .2mm print resolution. Donations Via Paypal are not necessary, but greatly appreciated. Thanks in advance. James. https://www.paypal.com/donate?hosted_button_id=9WJ86NEQW9GMQ
Statistics
Likes
13
Downloads
0