IKEA Tradfri Switch Decora Rocker Cover
Description
This is a Decora switch cover that is also a Tradfri switch mount. This allows you to cover up your Decora rocker switch and mount an IKEA Tradfri switch directly to it. This is done using a magnet that is glued to the back of the switch cover. There are also holes in the cover in order to turn the switch beneath on or off with a pencil or similar object if necessary. INSTRUCTIONS: When attaching the magnet, be sure that you hold a Tradfri switch to the cover to make sure that the polarity of the magnets is correct. Apply a drop of glue to the recess on the back and allow the magnet to snap into place naturally. I then carefully removed the Tradfri switch and used another magnet to hold the rear magnet in place while the glue dried. REQUIRED: 10mm x 1mm neodymium magnet Superglue (Optional) Longer switch plate screws ATTRIBUTION: I did use the cover plate designed by roznerd as my starting point: https://www.thingiverse.com/thing:2817331 OTHER MEDIA: Here's a video of the switch plate in action: https://www.youtube.com/watch?v=v4Ub8nhvTYA
Statistics
Likes
4
Downloads
0