Snapmaker CNC Vise
Description
Ready to kick those bulky Snapmaker clamps to the curb? Print a few of these low-profile vise-clamps, and mill as small and as close as you like. These clamps measure only 20mm tall, and utilize the hardware already included with your Snapmaker. Hardware needed for Four clamps: 8 M4 x 30 mm Socket Head Bolts (To secure to the waste-board) 4-8 M4 50 AND/OR 70 mm Socket Head Bolts (the actual clamps) 4-12 M4 Nuts, available at your local hardware store (Press-fit from below)
Statistics
Likes
120
Downloads
0