Monome NORNS shield Case
Description
A Case for the Norns shield and Raspberry PI 3b the bottom side is tricky to assemble but it works so far. Screw EJOT PT 2.2 x 4.5 but an outer screw for plastic should also work alternative M2 screw M2x6 https://www.digikey.de/product-detail/de/b-f-fastener-supply/MPMS-002-0005-PH/H738-ND/274949 still in progress!! later I will design a case only with clips without screwing infill 50% recommendation Please turn top before printing March 2021 Updated the top to version 4 but the change is very slight and its not necessary to print new one June 2021 update top to v5 and bottom to v2 some improvements the come from inquiries also add different knobs August 2021 update the top only some improvements to better assembly with bottom update conic encoder knobs September 2021 update the top. align the holes to the latest design Oktober 2021 update housing side view to LED of the PI Increase pusher holes a bit Bottom with venting holes November 2021 add the top with acrylic window space recommend 1,5mm thickness or 2mm could also work (not sure) dimension 40x72 mm
Statistics
Likes
12
Downloads
0