Model Painting Stand
Description
This is a free to use 3D printable model painting stand, there are three files but you have to print double for the arm and cap. The print settings I used were a 0.2mm layer height, 30% infill (grid), 15% support setting, and a 1.2mm thick wall setting. After printing, I took a hobby knife and a few drill bits to clean some of the surfaces to make the parts fit. It does not seem to hurt the shape or interior paint of any scale models I have used so far. Please help me improve this by printing your own and leaving feedback. Thank you *This is designed to be a very tight fit, it is done so that the friction will hold the arms in position, removing too much material after printing could ruin the print*
Statistics
Likes
3
Downloads
0