4s 26650 Cell Holder
Description
For each 4s pack, you'll need 1x top piece, 1x bottom piece, along with 4x shields. Cut one of the shields in half. Other than the printed parts, you'll also need 2x m3 20mm screw and 1x 45mm m3 nylon standoff. No support, no brim needed. Assembly should be fairly straightforward, see included pictures. **Make sure to orient the bottom piece properly to avoid shorting the battery!** Inspired by https://www.thingiverse.com/thing:3574040
Statistics
Likes
2
Downloads
0