Satsana Remix for Ender 3V2 and Ender 3 with BLTouch / 4010 and 5015 Fan versions
Description
# Please read the entire description before posting questions! Many questions regarding the design have already been asked so you could also read through the comments too. This is a remix of the Satsana fanduct by eric-anastas for the purpose of mounting it on the Ender 3 V2 and adding a BLTouch mount. Additionally I made a version that fits a 5015 fan for better cooling. As this was made on the basis of the normal Ender 3 version it will fit both on the ender 3 v2 and the original ender 3/ender 3 pro. Thanks to markymarc for confirming the compatibility on his ender 3 pro. The 4010 version does not require any additional screws besides those found on the Ender 3 V2 fanduct. For the 5015 version you will need 2 M4 nuts and 2 M4x17 bolts. A milimeter more or less is also fine. For modeling the BLTouch mount I used this https://www.thingiverse.com/thing:4462870 as a reference. Unfortunately thingiverse is bugged so I can't add this to the list of items I remixed from. As I based my BLTouch mount on this one, the probe offset is the same (probe offset: X-42.00 Y-10.00). Due to some people experiencing clearance issues with the first version of the bltouch bracket there is now a V2 version which has more clearance by moving the bltouch a little bit more to the side. The offset for the V2 bracket is X-43.65 Y-10. If you want to remix this feel free to do so. I have included the .stp files. Keep in mind though that the model of the X-carriage in those files is that of the old ender 3 and not the V2. If you want an accurate model of the V2 carriage for modeling I recommend this one: https://www.thingiverse.com/thing:4573240/files For the 5015 fan model I used this: https://www.cuidevices.com/product/resource/3dmodel/cbm-5015v-130 ## **Info regarding the BLTouch bracket V2:** People are having issues with the original bltouch bracket having too little clearance for the btlouch cable connector. This version moves the bltouch arm more to the side (1.657mm more clearance to be exact). The offset therefore has to be adjusted a little (the new offset is X-43.65 Y-10). If you plan to modify this bracket you will need to download the .step file for the BLTouch Bracket V2 as the bracket in the fanduct step files is still the original design ## **Optional support bracket** There is also an optional support bracket which I modeled as a request but did not test. It uses the same bolts as those that came with the creality fanshroud. It is not necessary to use this. It's supposed to hook over the metal plate and support the right side of the fanduct but the fanduct is light enough that it doesn't matter.
Statistics
Likes
1060
Downloads
0