KiNG Creality Direct Drive Extruder BMG Edition
Description
Direct drive reusing the stock fan shroud. Wire bracket: https://www.thingiverse.com/thing:4559502 This was designed with no supports in mind, the zip tie slot is 4x2.5mm you should be able to bridge that. Hardware List! Motor bracket: qty 3: M4x12/14mm with washers/nuts it's very snug. Motor mount: Stock included BMG screws should work. I recommend a .4/.6mm nozzle and .25mm layer height to retain accuracy of dimensions. I'd also suggest using PETG with at least 25% gyroid infill.
Statistics
Likes
5
Downloads
0