Flow Calibration Matrix (download the .3mf file)
Description
**Download the .3mf file instead of the .stl file.** (The .3mf file is already set up correctly to test your printer's flow.) - You must enable **brim** to hold the pieces together (10 lines should be enouth) and preferably set **line width** to **0.4mm**. - You should obtain at least one box with the surface fully filled but without an excess of filament. - If your print is well configured for your filament, you should get the best impression on the 9th box (1.00). - See the correction factor image to see how much you need to change the flow of your print. **Example: if your best impression is on the 0.70 box, you must correct the flow to 70%.** Instructional video (in Portuguese - turn on subtitles if necessary) https://www.youtube.com/watch?v=nqgzjwpc9F8 The original file was taken from Jasmine's GitHub https://github.com/jasminemoreira/3D_printing/tree/master/Calibration_Matrix Thanks to Jasmine Moreira! https://www.thingiverse.com/jasminemoreira/designs --- **You can help me buy a beer! :)** Any amount would make me happy and extremely grateful. **PayPal:** https://paypal.me/maurymmarques **Patreon:** https://patreon.com/maurymmarques
Statistics
Likes
15
Downloads
0