Stealth Desk Drawer
Description
A recessed drawer that mounts underneath a desk or tabletop and extends for access. There's a narrow version (8"x5") and a wide version (8"x6.5"), both work with the same mounting brackets. All you'll need are 4 screws to secure the brackets, make sure the screws aren't too long so they don't go all the way through your surface. It is sized to fit on a CR-10 sized build plate (300x300mm) so must be scaled down for smaller printers like the Ender 3. Features: - Designed to be easily 3D printed with no supports and forgiving tolerances. - Included drill hole template makes installation quick without any measuring - Mounting bracket has elongated holes so you can tighten/loosen the fit of the drawer as needed without having to re-drill holes - Endstops on drawer prevents it from falling out if pulled too far. - The front face of the drawer is lowered which makes it possible to store items that are slightly too long and stick out (like calipers) - Finger indent underneath for better grip when pulling out drawer Installation Instructions: 1) Tape the mounting template to the underside of your desk/tabletop and drill the holes for whichever size drawer you want (narrow or wide). 2) Remove the template, and install the mounting brackets with screws but don't tighten them all the way. 3) Slide the drawer in as far as it will go without blocking your ability to tighten the bracket screws. Push the two brackets inward to tighten the fit if needed and then tighten the screws while the drawer is partially inserted.
Statistics
Likes
3
Downloads
0